Ferrari Testarossa Case Study

9. Ferrari Testarossa (1986):

The Ferrari Testarossa is the twelve cylinder middle engine sports car developed by Ferrari that went for the production in the year 1984. The Cars That Set Revolution In The Automotive Industry of Testarossa all versions had power fed via the wheels from back mounted, 5 speed manual transmission. Engine between axles, but after the cabin such as back wheel drive and the back mid engine kept the center of gravity in car middle. This increase the ability and stability, thus it results in the standing weight distribution nearly 40 percent in the front and 60 percent in the back side. The initial version of Testarossa had been re-engineered for 1992 and it released the 512 TR versions. The new car enhanced weight

The Esprit had been launched on 1975 October at a Paris Auto Show, then went to the productions since 1976. It replacing the Europa Lotus model lineup and the first generation of this car named as S1. It contains steel backbone chassis along with the fiberglass body and the Esprit were powered by Lotus 907 four cylinder engine, previously utilized in Jensen Healey. The Cars That Set Revolution In The Automotive Industry of these had used 2L and it produced 160 BHP for 119 KW with 162 PS. The European trim produced the output range 140 BPH for 104 KW with 142 PS. The dimensions of this car consists of 96 in of wheelbase, 165 in of length, 73 in of width, 44 in of height and its weight less than 1000Kg. The Cars That Set Revolution In The Automotive Industry of Esprit model are varied from later Esprits by the shovel style air dam and with Wolfrace alloy wheels. The interior design of the Esprit is the clearest indication, which contains one piece cluster instrument with the green faced gauges of Veglia. This car had gained popularity because of its appearance in a James Bond film. The initial Esprit had been lauded for the handling and it was said that it had the best steering of any other

With the production of this car was a little improvement and change in a lifetime. This car was based on model of Morris Oxford series III made by the Morris Motor Ltd in Cowley and Oxford in UK. These first Cars That Set Revolution In The Automotive Industry had been made in India. British - Morris Oxford III series has been shifted to India. But the Ambassador vehicle was renamed from Morris Oxford 2 to the Morris Oxford 3 included small rear ring and profound headlamp cowls. They were completely redesigned to the steering wheels and dashboard. This car was a four door sedan with a four speed manual gear gearbox and rear wheel drive. These Cars That Set Revolution In The Automotive Industry have an engine displacement of 90.9 cubic inches. There was producing a power to 50 horsepower, 37 KW, 50 PS and maximum torque of 104 NM. It could accelerate from 0 to 60 in 28.8 inches, ¼ mile drag time at 402m in 23.2 Sec at high speed of 70 MPH. This car has been estimated weight of curb is 1120 Kg and its characteristic dimension of wheelbase 2464 mm and outside length 4343 mm. The dimpled bonnet was made by its introduction. Moreover, these models have side valved petrol engine 1476 CC and replaced to 1489 CC in 55