The three-component mixture was separated through the isolation of each individual component. The isolation process began with o-toluidine, which utilized the addition of hydrochloric acid, sodium hydroxide, and dichloromethane—to the mixture—for the formation of an organic layer that contained pure o-toluidine. Then, the addition of sodium hydroxide and hydrochloric acid to the remaining mixture resulted in an organic layer, which contained pure benzoic acid precipitate. Finally, anhydrous magnesium sulfate and methylene chloride were added to the remaining mixture of anisole, which resulted in a pure anisole because it removed all residual water and boiled off excess methylene chloride used. The percent recovered from extracted anisole, benzoic